-
If I set my GPU gov to BATTERY_FOCUSED in ES, I can see that my gpu governor is correctly changed to powersave.
`get_setting system.gpuperf` also correctly returns `low`
but on reboot, the gpu gov…
-
I've noticed that CPU power configuration is not consistent in Scylla Cloud, which as far as I know, it's configured at AMI level. This is totally related to `cpufrequtils` and scaling governors usage…
-
Hi,
I found that relay control is finally implemented again with mode 8. Tried to configure it but got an error.
This is my configuration:
` {
"module": "MMM-Pir",
"position": "b…
-
Sometimes you have a process that depends on more than one limited resource. If you're invoking the Governor protocol yourself, you can just do this with `Promise.all`. But if you're passing it to an …
-
Does the suite automatically detect if an ESC support governor mode?
CXXXV updated
3 months ago
-
# Scenario 4: Hierarchical Modeling (see [here](https://github.com/DARPA-ASKEM/program-milestones/blob/main/Nov-24-monthly-epi-demo/Nov%202024%20Monthly%20Demo%20Scenarios_FINAL.pdf))
In this scena…
-
I'm looking to run the governor with a rate limit of >~4GB/s ie 10GB/s which cannot be specified with the u32 values passed into `Quota`. I understand this might be slightly over what most people expe…
Arqu updated
17 hours ago
-
1. The main distinction of nitro engine is that it requires an "idle" mode where the motor spins slowly and the clutch is not engaged. For simplicity, I believe that the "Arm" switch should be safe en…
-
The current governor interfacing logic is confusing and difficult to unify across systems. I believe that using 3-position logical switches for governor is the way to go.
1. Instead of throttle pos…
-
## Summary
Process Lasso has an internal feature called Process Governor and has been out much longer than your program. See https://bitsum.com/docs/pl/Core%20Engine/core_engine.htm
Brief explana…