-
Hello Paul
I am trying to get the allwinner h616 and h618 to run with the cedrus driver.
is this possible so far because i get this message:
```
root@orangepizero2:~/v4l2-cedrus-enc-test# ./v4…
-
Hi, I have a problem with the u-boot shipped with Ubuntu and Debian images. I have a stock of Orange Pi Zero 3 with 2GB of RAM and this is happening on the batch 24-01 (I don't know if it is important…
-
I wanted to build a Ubuntu Jammy image, so I modified `scripts/main.sh` to change `RELEASE= "bullseye"` to `RELEASE= "jammy"`
But when I executed `sudo. /build.sh` for a period of time, the system p…
-
Hey,
I'm new to the field and I'm looking to put ARMBian on my box (I bought it only for that).
I thought my box was an h6 in fact no it's an h616 :(
I'm trying to figure out how to put Armbian o…
-
I am trying to operate UART with RTS CTS. However, when I run gpio readall, I see H616 at top not H618.
I doubt if all the differences of H618 from H616 are updated.
-
Hi,
This is _very_ interesting project!
I want to give it try on mine appliance (MiniMyth2)
With 6.11.3 kernel i have well working v4l2_request on series of socs (h6/h313/h616/h618/rk3328/rk3399/rk…
-
I installed the latest Armbian Bookworm on the CB1 eMMC but without luck so far.
Maybe i will have to add the BoardEnv.txt with fdtfile set to sun50i-h616-biqu-emmc?
It would be great to either to…
-
I designed an h313 board，I can use the sd card boot uboot and linux ，in linux i tested emmc driver it is ok 。it can work steadily for hs200，but when i use emmc boot，spl boot but uart print :
mmc_loa…
-
Hello, is it possible to add [Allwinner H616](https://linux-sunxi.org/H616) driver support which used in Orange Pi Zero 2.
Documentation says that "Apparently it has no CPUS (ARISC management proces…
-
Is it possible to use OBAL with MangoPi MQ-Quad MCore-H616?