-
Hi!
Very good work and thank you to share your project!
Can you upload list of material (magnet, hall sensor..) and some pictures of electornic ?
I'm working on make stronger supports for srp…
-
### The problem
Some sensor enities have been changed to buttons in the Z-Wave intergration
Currently, I see this with the according devices:
Carbon monoxide FireAngel
Heat Detector FireAngel
…
-
Hall Effect
Sine output
Example: https://www.amazon.com/Universal-Sensor-Sender-Tachometer-8-18UNF/dp/B09FXDCM3G
And display:
https://www.amazon.com/Tachometer-Waterproof-Compatibility-Mech…
-
* looking for a happy BOM https://github.com/rusefi/hw_microRusEfi/tree/master/gerbers/R0.6.0
* let's please have VR and Hall edition as two separate BOMs
https://github.com/rusefi/rusefi/wiki/Har…
-
Use ADC for HALL sensors (IO 15,16,17) https://docs.espressif.com/projects/esp-idf/en/v4.4/esp32s3/api-reference/peripherals/adc.html
Create a function to get these voltages for a monitor. Calcula…
-
Hi, for some reason, the swiping to next card does not work for me on browser, only button navigation. On mobile the swiping works fine. Is it config issue?
```
type: custom:css-swipe-card
cardId…
-
### Variant
ADC
### Control type
FOC
### Control mode
Torque
### Description
I built a scooter with two motors mounted on the back. When the motors screwed together and working with hall sensor…
-
Do you have any documentation about connecting the Hall Sensors to raspberry pi? I'm tryin to get odometry data for the robot tank.
Thanks a lot.
-
I wanted to ask whether it is possible to replace the original two axis thumbsticks with hall effect thumbsticks, or if it requires additional changes in the firmware/pcb?
If additional changes are…
zsln updated
8 months ago
-
Hello, I need help, I have simulator pedals, previously I had them connected with arduino and a sketch of my own. Now I want to change the electronics to stm32 and freejoy. But it happens to me that …