-
Edit: edited as main heater is not controlled by a relay I as originally thought
An alternative to hot-side heat exchanger is to use small ceramic heater used in 3D printers (cost is $3-6). Heater…
-
Scenario: A hot water loop serves various reheat coils, FCUs, DOAS heating coils. The hot water loop also serves a water-to-water heat exchanger to a WSHP loop.
How should this be described using t…
-
While EnergyPlus allows for heat exchange using four nodes (two for the supply side and two for the use side), OpenStudio does not seem to support this setup for WaterHeater:Mixed.
@joseph-robertso…
-
One option: use a siphon to maintain equal water levels in heater and reactor.
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What would your feature do ?
This KPI measures the annual heat losses within the heat network. Understanding h…
-
Issue overview
--------------
During defrost periods the inlet and exhaust mass flows of a HeatExchanger:AirToAir:SensibleAndLatent object connected to a OutdoorAir:Mixer go out of balance. Mass flo…
-
The [ScalableTestSuite_OB](https://libraries.openmodelica.org/branches/heavy_tests/ScalableTestSuite_OB/ScalableTestSuite_OB.html) test report shows the results of running the tests with the old backe…
-
-
### Expected behavior.
logger_config.py 是我自己定义的一个库，但是无法加载，哪怕是 `from .logger_config import setup_logger `…
-
Hello, I am an undergraduate student majoring in Mechanical Engineering.
I am currently attempting to compare the e-NTU method and the Energy Balance Equation for a 2D-Laminar counter flow heat ex…