-
Hi,
I have Supramatic HT3 anc cannot reach the communication...
I am using ESP32-dev board with this connection:
![image](https://github.com/tsaG1337/Hoermann-Garage-Door-Supramatic-E3/assets…
-
HT3 is hardware testing phase that is conducted by the hardware vendor. Details are discussed in the [Sayma v2 hardware contract](https://github.com/sinara-hw/Sayma_AMC/wiki/Sayma-v2-contracts). TS2 …
-
hi , i'm using the make build, encountered with this error.
ht3@ubuntu:~/gowork/hyperbench$ cd hyperbench/
ht3@ubuntu:~/gowork/hyperbench/hyperbench$ make build
# github.com/gobuffalo/packr/v2
…
-
Hi,
Thanks for development of this nice tool.
I found no parameter to set strandness in the function "normalizeToMatrix", so I try a test to know whether the strandness of the input GRange objects …
-
add plattform modules for
- Clipboard Access
- getCB(whichone=...)
- setCB
- Mouse
- GetPos
- SetPos
- Click
- Keyboard
- getState(key='all')
- keyPress
- CharToKeySequence
- parseKe…
-
/status
-
I know there is at the moment Last know error code, which is really nice.
But I would like to have the active or current alarm code, because I want to use a template in homeassistant that shows wh…
-
问题描述: 从 iso 启动时会触发 kernel panic, 导致内核无法加载. (由于无法成功安装系统, 无法确认启动本地系统时是否触发)
主板型号: [LS2C5LE](https://github.com/loongson/Firmware/raw/main/Image/LS2C5LE.jpg) (大别山 T2218A 双路 3C5000L 7A1000)
![image](…
-
Add Hitag 3 write in cypher mode
-
Dear all,
I installed halotools as explained in the guide, step by step.
However, when the installation test always fails.
Here the exit on the terminal:
ImportError while loading conftest '/ho…