-
**Describe the bug**
If Reset command and reset DAA are issued, cannot request dynamic assignment (DAA) again which per spec shall be possible
, please add I3C protocol?
![image](https://user-im…
-
On https://docs.zephyrproject.org/latest/hardware/peripherals/i3c.html, it is mentioned as
**Do SETDASA to use static addresses as dynamic address if so desired**
![image](https://github.com/user-a…
-
Using an issue to track fixes discussed offline.
VCS generates many warnings when compiling:
* PCWM-W Port connection width mismatch.
* This includes wstrb signal in axi_adapter, ibi_queue_wda…
-
BMC could get the EID of all slots when booting up.
Couldn't use pldmtool to communicate with some of the slots sometimes, but could communicate if I send the command again.
After being idle for a…
-
This implements support for the i2c and i3c basic controller logic that will be required for the DRAM proxy and related access. These are blocks that provide the SP access as an initiator.
-
## Origin
libmctp hosted by the openbmc project at https://github.com/openbmc/libmctp
## Purpose
Implements a transport protocol, MCTP, which is useful for multiplexing and packetizing data a…
-
[Status]
Consoles of slot1~slot4 are normal but couldn't connect to consoles of slot5 ~ slot8 sometimes.
Reboot BMC and the issue will be missing sometimes.
Firmware version:
BMC: Built with b…
-
We are developing zephyr i3c driver for our device which has a i3c secondary controller. The secondary controller will come up as target on the bus initially. We don't see enough support in current Ze…