-
Hello! Will you add support for pulse boards or I should search support in the other repos?
-
hi @ardera
We are using Yocto to build-up an custom linux image for our nxp im8x board.
And using flutter-pi to run our UI app which developed by flutter version 3.22.2
After compiling linux …
-
請問作者在建立 NXP iMX8 Plus 的 BSP 環境是幾版的
我下載 Tengine Lite release v1.4 for NXP 的版本,照著 README.md 進行編譯時,沒有辦法直接編譯成功,
sample/console/tengine/linux-arm64-v8a/lib/libtim-vx.so 在編譯時會提示缺少部分 lib,
後來將 TimVX 裡面的某些 …
-
**Description**
I'm running a Yocto Hardknott with basler meta layer and a Basler A2500-60mci.
Everything is working just fine, i was able to create my application easily.
When I tested it usin…
-
I am on an embedded Linux device (Yocto, iMX8) and using labwc as compositor. When I run wayvnc with the `-g` option and move the mouse over the mirrored screen, some old mouse positions from the fram…
-
I am using Debian Buster on HummingBoard Pulse (i.MX8 - ARM). `uname -a` yields following result: `Linux sr-imx8 4.19.72-imx8-sr #1 SMP PREEMPT Mon Feb 10 03:59:35 UTC 2020 aarch64 GNU/Linux`.
I ha…
-
Hello Team and fellow guys !
We are using kivy for long time and have developed many applications based on kivy and all were running without any issues these days. Recently one of our requirements …
-
### LVGL version
v9.1.0
### What happened?
I'm attempting to port our v8.3-based application to LVGL 9.1
We're using a ILI9341 240x320 screen physically rotated to be 320x240, and we're re…
-
Hi,
We are designing a custom board using imx8mn and ksz9897, connected via I2C.
We are presently using two EVK's, the i.MX8MNano-LPDDR4-EVK and the EVB-KSZ9897.
They are I2C connected via an I…
-
The iot-gate-imx8 device type supports uarts in either rs232 or rs485 mode. The SV can tell u-boot to alter the device-tree to the corresponding mode by setting either:
```uart_mode=rs232```
or
```…