-
0. Could you send email to [xianjun.jiao@ugent.be](mailto:xianjun.jiao@ugent.be) to introduce your self?
Sent
1. Our image is used directly or you build your own image?
I used the image "openwifi…
-
### Describe the bug
Not a bug, but a request to add support for the [INA260](https://www.ti.com/product/INA260).
### Steps to reproduce the behaviour
N/A
### Device (s)
Raspberry Pi 4 Mod. B
##…
-
Hi,
I followed the last developments of the openwifi project with high interest and I have successfully started the new release Notter 1.4.0 by using the "zed_fmcs2-board" and the "zcu102_fmcs2-bo…
-
Currently, when users use a INA228 or INA238 Power sensors with FMUv6X, they will have to go enable & disable the parameters manually. Is there a way to Auto-detect or enable them all so user do not h…
-
### Describe the bug
MR52 dts defines "red:user", "green:user", "blue:user" for the system LED but 'ls -al /sys/class/leds/' does not show any of them. The problem is seen in 23.05.3 as well as the l…
-
I recently purchased a few different mt7601u-based WiFi modules from Amazon and a couple of them are causing repeated kernel errors on USB insertion with this driver:
```
[ 43.380628] usb 1-1: new…
-
Hi Zanduino,
thank you very mutch for the Libary.
Is it Possible to Integrate the INA228 ?
here are the Specs 85-V, 20-bit, ultra-precise, I2C output current/voltage/power/energy/charge monitor…
-
### Describe the bug
After a `sysupgrade` to the latest snapshot, the MR-52 kernel-faults initializing Wifi on boot:
```
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux v…
-
**Describe the problem you have/What new integration you would like**
Would it be possible to add INA228 (I2C) and INA229 (SPI) power monitoring chips? There're already some INAs supported, but…
-
### Description
Hello,
I got some situation that my 4GB Coral Development Board had a hard time to detect my USB storage device. Due to my attention, this situation happens more and more on low te…