-
### The problem
I stopped seeing device updates from the ISY integration, I believe after a core update yesterday. If I turn a light on with HA, the switch goes on briefly, then returns to the off po…
-
I had a power outage today and things didn't startup in the right order which resulted in the below.
The failure was transient as it just happened that hass started up while the isy was starting (w…
-
Howdy!
(1) THANK YOU! Everything is soldered up, just awaiting the dongle
(2) In your posts on U-D you mention needing to disable BT and built-in-serial but I didn;t see that on Git, so just for the…
-
Right now an error is logged and message ignored if a new node is added to the ISY after the initial connection is made to the event stream.
This module should support live adding/removing of nodes…
-
### The problem
As a developper, it's very easy to forget adding all expected translation keys into `strings.json`
I am working on catching this within the regular test routines (see https://githu…
-
Im new to using an ISY, but I was intrigued and decided to take the dive. However Im having some trouble getting the PLM Bridge to work. From my understanding, if I have everything setup correctly, …
-
I have the 2852-222 link sensor and no matter what I do I cannot get it to link. I got my two dimmer switching to link just fine. But can't get the leak sensor to work.
Any tips would be appreciat…
-
Hi,
I'm getting an error in the log file anytime there is interaction the ISY. It looks like it causes the binding to disconnect from the ISY and eventually reconnect after a bunch of java error m…
-
### The problem
I recently received/added an Insteon Lock Controller 2862-222 Rev 3.0. The host UDI ISY controller commands this controller perfectly (i.e. unlock and lock). The the controller and …
mahk8 updated
3 months ago
-
First off, brilliant project, thank you for doing it!
My ISY is booting into safe mode, not recognizing the PLM. (I am decent with the IT side of things but less confident with the custom wiring.)
…