-
Hello, I've been attempting to install tow-boot onto my Radxa Rock 4b Plus. (This is the same board as "Rock Pi 4B+", Radxa has changed their naming scheme and re-named this board.) I have attempted b…
-
JEDEC JEP106 Manufacturer ID list is very long and many brands are defunct since years or even decades.
We had to create a short list with the most well-known manufacturers. Others will reported as …
-
DBees updated
7 months ago
-
Test Body - ezmgcnwnam
-
I'm trying to read flash of Tuya relay with ZT3L chip. I prepared TB-03F and it seem to be able to communicate with ZT3L chip over SWire except that I'm regularly seeing corrupted data. For example he…
-
In step22, the application expects the app image data to be uploaded into the flash memory at a 1M offset. This step currently fails due to issues with SPI flash access. The issue is that no output is…
fm4dd updated
1 month ago
-
SPI.begin must be call even in the SPI library with " transaction" included in the Arduino IDE 1.8.5.
See that example : https://www.arduino.cc/en/Tutorial/SPITransaction.
A good place to include it…
-
I am using a debian 12 image created with your tool.
`./buildimg.sh bpi-r3 bookworm`
After a system update and upgrade I am not able to boot the system anymore.
I am getting:
```
## Erro…
-
This is being tested on Raptor Lake FSP from this repository, i9-14900K, 2x48GB 5600MHz Crucial Pro DDR5 with XMP 3.0 support.
I'm on the stage in our firmware building where I want to add XMP. I h…
-
The library assumes 4MB unless you specify otherwise (64 blocks of 64k). The last parameter is the number of blocks. Reading the JEDEC details and calculating the size would be rather better.