-
When following install instructions, the following error happens:
"The version 7ee0075 for this integration can not be used with HACS."
Versions:
Homeassistant 2024.8.3 on PI 13.1
HACS 1.3.…
-
I don't exclusively use Homekit to change the state for some devices. For instance, I have some KlikAanKlikUit switches for which I also use a hardware remote control.
This causes an issue with the…
-
Can you please return type 6 (doorbell button) to devices, it helps me to do some automations
-
Hey Robert,
I have installed a 433Mhz transmitter on Raspberry Pi physical GPIO pins 4 (VCC), 6 (GND) and 8 (ATAD) and compiled the original kaku app found on the Tweakers forum. With data transmis…
-
Hello, I have found some types of kaku devices, so maybe you can add it in future releases:
deviceType=13 [Kaku doorbell](https://www.robbshop.nl/en/klik-aan-klik-uit-wireless-doorbell-chime-433mhz)
…
-
Hello,
I am setting up kaku for homebridge but my question is how you can get the address for in the config file.
Best regards
-
Hi
When i copied your script with the platform and accessiories exactly as written, to my json config file in npm homebridge docker, I get an syntax error.
Is there something different after a year?…
-
Hi there!
Using this conf file (built off the one provided - /config/rtl_433/rtl_433.conf - password section)
Version: ` 2024.6.0`
```
## version 2024.3
report_meta stats
report_meta t…
-
```
Guru Meditation Error: Core 0 panic’ed (Unhandled debug exception).
Debug exception reason: Stack canary watchpoint triggered (rtl_433_Receive)
(Stacktrace)
```
stack size?
Anyone know …
-
I had a Cresta DTX500 weather-station. The weather-station outside is for temperature, rain, windforce and wind-direction. After a day or something it picks up only one signal and it was saying low on…