-
Adding support for software MACs such as the following would be a nice way of reducing component costs for less demanding applications:
https://github.com/essele/rp2040-rmii
For example, a ENC42…
ryao updated
6 months ago
-
The reason you had trouble dynamically configuring the PHY using the strap pins is that the chip is not designed to do that. The strap pins are designed to *only* be set via pull up or pull down resi…
-
Hello together,
i found finally time to continue the work on my amplifier. I'm more the HW guy an struggle currently to compile the package in VS Code... Anyway i need then help to adapt this SW to…
-
On my MK809iii knockoff there is a LAN 10/100 port that is connected to a SMSC8720A Ethernet chip. I have not been able to find an available source, but I have contacted the mfg to see if one is avail…
-
Hello Tobias,
would it be possible to add support for this board?
https://github.com/LaskaKit/ESPlan/tree/main
I think it is all in one solution for your project.
-
### Describe problem solved by the proposed feature
希望 AT32 的以太网驱动能支持 LAN8720A,之前曾经自己移植过, 但不能通信, 希望官方能支持一下. 谢谢!
@sheltonyu
### Describe your preferred solution
_No response_
### Describe possib…
-
Hi. I'm working on a custom ethernet PMOD designed specifically to work with LiteX, based on the LAN8720A RMII PHY.
At the moment it doesn't seem to be able to send or receive anything.
I though…
-
I've been trying to implement the Shadow LED demo on a Curiosity PIC32MZEF Development Board (The v1) and the LAN8720A PHY Daughter Board.
What I've done is:
- Configured the AmazonHWInterface a…
-
Testing with `sync_with_sample_stuffing` branch under `ESP-IDF v5.2.1`:
```
[1178/1255] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
FAILED: esp-idf/main/CMakeFiles/__idf_mai…
-
Hello,
Thank you for all these really helpful instructions!
I am currently using for the first time a WT32-ESP01 and I am encountering a few difficulties to build the source code snipped you sha…