-
I am trying to set up a laser engraver with the smoothieware firmware and config files provided on the skr v1.3 Github page. I have enabled the laser module and set the pins for enabling the laser alo…
jr-11 updated
3 years ago
-
So I have a few questions (if I am posting this in the wrong forum, please redirect me to the proper place):
1. After digging through your code, I just wanted to confirm that this is for a 24x18 be…
-
Hi! i use this app to generate gcode to engrave pcb on laser engrave, and i need to edit gcode on text editor. can you add laser support?
-
### Possible Fixes
Yes
### Modpack Version
0.2.60
### What happened?
Phosphorus-doped Monocrystalline Silicon Boule cannot be cut down to 2nd tier Wafern. Recipe requires either water or lubrican…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I use Marlin to control a laser engraver (using inline mode) and when I activate input shapin…
-
I'm not quite sure whom to contact on this matter. As far I understand, in case a company uses modified GPLv3 code, but doesn't share the sources, only the copyright holder of the software can request…
-
### Summary Description
Hi There,
When I execute the work for engraving I get this error:
![Capture](https://user-images.githubusercontent.com/111974404/186403505-ff725daa-6bb2-4447-b6e4-662316…
-
Evening. I have recently purchased a two trees TT-55 laser engraver. Board says its an MKS LTS V1.1.
Firmware seems to be dead and the supplied USB stick didnt have any firmware included.
Two tree…
-
Like these, but perhaps powder coat in red, with silk screen or engraved labels, and use ebonized ash for the sides. This should be fairly cheap, if we use one of the online CNC sheet metal houses (e…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I was trying to add a physical button emergency stop button to a laser machine. I didn't wa…