-
Igami updated
3 years ago
-
There are LED strips inside the laser cutter. But they are either not hooked up or broken in some way.
It will make for a much better user experience if we get the lights back up and running.
esden updated
2 years ago
-
- [x] As a trainer for a piece of equipment I want to be able to mark people who have finished the training quiz and attended a training as trained on a piece of equipment.
- [x] As an admin I wan…
-
> Apr 4 23:15:02 LaserCutter Tool appears to have stopped running while it's off!
> Apr 4 23:15:02 LaserCutter Tool appears to have stopped running while it's off!
> Apr 4 23:15:04 LaserCutter To…
-
When firing the laser it is possible to confuse the PC USB interface. This can result in a locked up computer that requires reboot. It makes for a very flaky experience.
More diagnostic is needed b…
esden updated
2 years ago
-
* [ ] get it
* [ ] print it
* [ ] laminate it
* [ ] mount it to the printer
(To the tune of Harder, better, faster, stronger)
ri0t updated
3 months ago
-
It is very easy to crash the machine and result in skipped steps and possible bad wear to the machine when pressing on the home button in the PC software.
The most likely issues are that the machin…
esden updated
2 years ago
-
The lasercutter does not have a red dot positioning laser. This makes it hard to find origin points and if the laser will cut in the right spot on the material. It would be amazing if we could add tha…
esden updated
2 years ago
-
Let's start with the fact that I really like our existing settings import and export functionality. It provides the visitors of places with a lasercutter to get going fast, with all the lasercutter se…
-
When the lasercutter stage is moving up it skips steps. Moving down works fine.
Not exactly sure what the exact problem is, but my guess is that either the gearing is not stiff enough, and/or stepp…
esden updated
2 years ago