-
Hi i added tmp421 sensor to evb-ast2600. Built an image and launched qemu using generated image. In webui i m not seeing any sensors.
-
Please add support for the following devices and sensors that have kernel support:
AHTx0
BH1750
BME280, BME680, BMP280, BMP380, HDC100X,
JC42 complaint sensors, for example MCP980x, MPU6050, MPU…
-
**Describe the problem you have/What new integration you would like**
I have PLC board which use this LM75 i2c temperature sensor and I would like to use it. Basically this i2c sensor is very cheap a…
-
- [ ] move the J1 connector by 1mm to the edge
- [ ] R104 = DNP or add divider, now LM75 is pulled to 12V
- [ ] add arduino series resistors (nano every has 5V IO)
-
First Remove all platform kernel module driver.
![default](https://user-images.githubusercontent.com/35523342/45875341-f87fc780-bdc9-11e8-89b1-54cd0ab50e92.png)
There's no lm75 device under ismt…
-
When monkey patching a model with clear the output is appended instead of replaced in the same spot, e.g. enterasys.rb
```
require 'oxidized/model/enterasys.rb'
class Enterasys
using Refinem…
-
I'm using the basic example from your library. The component is an LM75A breakout circuit board from Ebay. With the Arduino nano, I was getting -0.5 readings. Then I solder bridged addresses A0 - A2 t…
-
TMP275AIDGKR could be an alternative but much smaller package (VSSOP8)
Compatible at the pins point of view with LM75
-
*dreieck:*
The packages
* kmod-hwmon-gpiofan
* kmod-hwmon-it87
* kmod-hwmon-lm75
* kmod-hwmon-pwmfan
* kmod-hwmon-tmp102
can be selected for the target architecture ''x86''/ subta…
-
Currently LM75 is the only easy to use temp sensor supported.
Would be nice to have support for the SHT31 temp/humidity sensor which is quite common these days and readily available on small pcb bo…