-
In the pin diagram, number 27 of mosi, number 5 of sclk, and number 18 of cs are missing. We are suffering because we cannot resolve this. please help
![캡처](https://github.com/Xinyuan-LilyGO/LilyGo-L…
-
I am experiencing issues with connecting a sensor to the I2C interface on my LilyGO LoRa32 board. I have connected the sensor (SHT20 humidity and temperature DFRobot) to pins 21 (SDA) and 22 (SCL) but…
-
Hi,
is the Heltec LoRa32 V3 already supported or are you planing to implement the support?
Thank you
regards Chris
-
Hey, thanks for the tutorial. Do you know, how can i connect the board with a Lora 32 Paxcounter?
![Lora32 Paxcounter](https://user-images.githubusercontent.com/118231543/211881976-48ca4021-33f5…
-
I slightly modified the hardware (pull up resistors) and the pin out, so the code runs on a heltec wifi lora32 board. Is this of interest for you?
-
Hi !
I recently buy a HiLetGo ESP32 Lora V3 from Amazon. All seem good but the module is unable to connect to my AP. DashBoard station indicated : Radio in READY but MQTT and Wifi RSSI NOT CONNECT…
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
### Current Situation
I've gotten OOK_Receiver running, but I wondered if anyone has added display output? Essentially, it would be easier to demonstrate the program if the display showed activity.
…
-
Building FS image from 'data' directory to .pio\build\ttgo-lora32-v1\spiffs.bin
error: can't read source directory
*** [.pio\build\ttgo-lora32-v1\spiffs.bin] Error 1
===============================…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [x] I have up…