-
### Cura Version
5.8.0
### Operating System
OS X Sequoia 15.1
### Printer
Ultimaker S5
### Name abnormal settings
_No response_
### Describe model location
_No response_
### Describe your mo…
-
### System information
- **OS Platform and Distribution**: Ubuntu 20.04
- **Apollo installed from**: source
- **Apollo version**: 9.0 (I think it's version 9.0. As of today (Nov 23, 2024), I am …
-
Since version 7.1.0 I of Yubico Authenticator I experience reproducible hangs.
The UI freezes and I cannot enter the OTP or FIDO pin:
 Flash new firmware Version: 2.1.3f-8-1 (on the previous Version: 2.1.3f-7 all OK)
2) Start pri…
-
There is a "Adding a new mainboard" section. Is there maybe some tutorial which goes into more detail?
Like starting with the BIOS from some desktop mainboard manufacturer (Gigabyte,Asrock...) . How …
-
Not seen on other hardware, but on the IBM 5155, the "XT Portable", the keyboard doesn't work with TLVC.
Works fine with DOS, serial io is not affected. Also works fine with COMPAQ Portable Plus, …
-
Basically as the title says, I can't seem to find any CAD model that can be used for designing enclosures, etc. for the mainboard. I've been using the SKR cad model for the moment since it has the sam…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
The fan for the motherboard CR 4.2.7 will only turn on when the part cooling fan turns on.
##…
-
I want to launch perception module localy and I found this [instruction](https://github.com/ApolloAuto/apollo/blob/r8.0.0/docs/06_Perception/how_to_run_perception_module_on_your_local_computer.md). If…