-
I finished the mechanical design of the scintillator assembly and AFE
The setup consists of 4 PCBs:
- main AFE board with CPU, connector, LDOs, an amplifier for 1 SIPM
- auxillary AFE board with th…
-
The hub design is finalized.
The box was equipped with several diagnostic LEDs. Every AFE channel has 3 LEDS:
- connection OK. It is on after CPU detects valid CAN endpoint.
- 5V rail overcurrent
…
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
```
Original issue reporte…
-
On the 2nd layer of the elevator, the arm will be attached to it.
As the elevator moves the arm will have to rotate up, and it will rotate downwards as the elevator descends.
-
We want to develop a device that looks EMO and We'll add extra features ( algorithm teaching, etc.). So, We have to detect the EMO Mechanical system. Please research it and create documentation.
-
-
### Describe the Bug
I was working out a contraption design, and when testing if it would move correctly, I encountered a strange bug where the sticky/regular mechanical piston would give an "Unable …
-
![image](https://user-images.githubusercontent.com/18581201/40408370-93fdc094-5e67-11e8-97f1-d026a943dacc.png)
I collect the comments from the chat discussions, to then document better the issue:
…
jurra updated
5 years ago
-
Add to Concept Phase/Preliminary Design dir.
M1NU5 updated
5 years ago
-
This is a design proposal, not set in stone, here for feedback and so I don't forget what I'm doing.
## TL;DR
* Current organ code is an unfinished, unbalanced mess, so this needed to be done anyw…
N3X15 updated
4 years ago