-
Hi, I've noticed, that it successfully disconnects my VPN, when im in my designated network where it should disconnect.
It also sucessfully auto-enables the vpn tunnel when switching WiFi.
But i did …
-
# Bug Report
## Problem
Attempted to sync mobile device with desktop account, resulted in the following error:
![status-mobile-sync-bug](https://github.com/status-im/status-mobile/assets/29414…
-
### Steps:
1. Restore a user with an available asset on all networks (e.g., ETH).
2. Go to the bridge flow.
3. Generate routes.
4. Deselect all networks in the FROM section.
### Actual result:
…
-
### Steps:
1. Go to send transaction flow
2. Add the multichain address into the input field (all available networks must be included in the recipient address)
3. Enter a value on the "Send To" pag…
-
### Steps:
1. Go to the send transaction flow.
2. Add the multichain address in the 'TO' input field (all available networks must be included in the recipient address).
3. Enter a value on the "Sen…
-
### Steps:
1. Recover a user with available assets on at least two networks.
2. Enter the amount you are going to send to build the route. (NOTE: The current amount should be available on each netwo…
-
### Steps:
1. Recover user with available assets
2. Enter the amount you are going to send to build the route.
3. Disable all other networks except the built one in the 'Advanced' tab -> in the "Se…
-
https://github.com/Koniverse/SubWallet-Documentation/blob/24ac2dc77cfc99c46824768217bca1003e229810/mobile-app-user-guide/import-and-manage-customized-assets/import-tokens-and-manage-customized-tokens.…
-
CM10 is having issues with mobile networks. It chooses the network automatically alright. But if I want to manually scan (Settings > Wireless & networks > Mobile networks > Network Operators) to see w…
-
My test environment includes two computers, C1 and C2, both equipped with dynamic public IP addresses, situated behind a home router that has UPNP enabled. Additionally, there are two mobile phones, P…