-
### Description
Cover API endpoints from GUI dashboard.
## List of them:
### Provider
- [x] /dataservice/network/connectionssummary #198
- [x] /dataservice/clusterManagement/health/summary #…
-
When I invoke the following all is good
```
lmcgibbn@LMC-056430 ~/Desktop $ pycovjson-convert -i osu_cioss_weekly_msla_geovel_2012_v1.nc.gz.nc -o osu_cioss_weekly_msla_geovel_2012_v1.nc.gz.nc.covjson…
-
I initially had built this using the original plans, but found I could not reliably get the camera cable to bend enough to close the case without breaking the cable. Also, the original 3D geometry had…
jil24 updated
2 years ago
-
Hi there,
i have a Gerber Project i downloaded from EASYEDA Community.
The Files come in a Zip and Split into .GBL and .DRL files.
I'm running the following command :
`pcb-msla convert -e 540…
-
### Describe the issue
### **User Experience:**
Visually impaired users who depend on assistive technology as screen readers will face difficulty while navigating on nested interactive controls or…
-
Didn´t find anyone mentioned the printers above.
Would it be possible to add this kind of printer as well, or should they work already?
Many thanks for taking this into consideration.
-
I followed the instructions as said for the onboarding process but after the deployment process it is not showing the website made. Instead it's showing the template only which was given ... Can anyon…
-
Hi, this is more a question or request, not an issue.
I use a Pi Zero with a Pi Cam to observe my Prusa SL1 (MSLA printer).
https://www.thingiverse.com/thing:3872789
Of course the Pi is not con…
-
### Description of the bug
- [GKone Slicer](https://www.uniformation3d.com/pages/gkone)
- [GKtwo Slicer](https://www.uniformation3d.com/pages/gktwo)
They are clearly modified forks of PrusaSlicer…
-
If you click and drag what you think is the background next to an edge's add-node button, the drag is blocked by the drop target on the edge button.
This blocks any mouse interaction like primary/se…