-
Hi There
I got success today to run Microsoft Microcode on NRF52833, using the Adafruit Bootloader :)
I have to edit the HEX code created my Microcode and convert it to uf2 using the uf2conv.py uti…
-
I have an xbox controller model 1708, ive tried a few of them.
when pressing the xbox center button there is nothing registered under miscButtons. When I try a PS4 or PS5 the PS button DOES regis…
-
Hi there I am using crazyswarm2 (https://github.com/IMRCLab/crazyswarm2) and using the wifi streamer and I found a bug, quite a detrimental effect on the streamer performance. When I run with just the…
-
# Mesh topology for IoT
* https://cafe.naver.com/stsmarthome/61447
* https://cafe.naver.com/stsmarthome/49552
* https://www.u-blox.com/en/blogs/insights/thread-vs-bluetooth-smart-home
-
I finally compiled using Msys32
![image](https://user-images.githubusercontent.com/11488460/111054369-ef2bbf00-844a-11eb-932c-0691a318f005.png)
-
Hello all,
I have been working on trying to stop the BLE on my IoT's from crashing (#73). Originally I focused on catching the _recvIndex value so it didn't go too high (similar to this #202 and po…
-
Hello, new problem from me:
I have a DHT22 temp/humidity sensor and I am kind of out of guesses as to why I can't get it to work in indi-allsky.
I have it plugged into a bench test raspi4 identi…
-
Hello, recently got this project running after migrating over from TJ's all sky. I'm currently trying to sort through my issues and the first is that it doesn't seem to be creating timelapses or keogr…
-
Hello! I have purchased XPLR-AOA-1 and flashed the software on c209 and c211. I confirmed that the light on c209 is blinking, and AT commands are available in s-center. However, it seems that c211 is …
-
I suddenly have 1 tag that is misheard from 2 anchors. reported as on the other side of the anchor board
one should report about -20 to -45, but reported as +44
other should report at + 20-25, r…