-
Hi Tony, I would like to know, if the original PCB and schematic files, at least of the clock-face, are available, too, regardless if they are from Kicad, Alttium. Orcad or any other software. I have…
-
```
I've just made a part for the IN-12 Russian nixie tube for a project(8 bit
relay + valve computer) I'm working on because using headers with named pins
were getting unwieldy and not very elegant…
-
```
I've just made a part for the IN-12 Russian nixie tube for a project(8 bit
relay + valve computer) I'm working on because using headers with named pins
were getting unwieldy and not very elegant…
-
Love the look of this project. Have you shared the PCB setup at PCBway? I'm great with a solder iron, but I have no experience getting boards manufactured. I believe PCBway has a way to publish the…
-
I have this same clock and would love to switch it over to an ESP32. Do you have the PCB files you used for the ESP32 adapter?
-
Mostly an image dump!
-
## Blogs
- https://github.com/Staok/thoughs-about-hardware-design
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/…
-
From #9, plugged in the electrophoresis box with power supply and used multimeter to check output voltage.
Saw something in the order of 20 Volts (could have been less or more, not sure) and turned th…
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …