-
Hi Tony, I would like to know, if the original PCB and schematic files, at least of the clock-face, are available, too, regardless if they are from Kicad, Alttium. Orcad or any other software. I have…
-
Hello there,
I'm also trying to do a nixie clock with esp32.
Am i wrong or the code is actually missing some parts? (like the actual interface with the tubes?)
maxdd updated
4 years ago
-
Hi,
I would ask for help. I tried to build a clock, but they don't work. Nixie doesn't show anything. Wifi settings work, oled display shows time. I tried the test code `www.instructables.com/id/Driv…
-
Mhhhh, nice, but after installing the sketch it lasts 1 minute to see the first picture.
The ball does not move and the M5 buttun does respond really slow.
I have installed the:
https://github.co…
-
Hi,
I saw this pop up on my YT feed - very interesting and love the concept of an addressable PWM driver for nixie tubes.
I actually have a small stash (now 14; I had 20 in total, but already bu…
-
```
I've just made a part for the IN-12 Russian nixie tube for a project(8 bit
relay + valve computer) I'm working on because using headers with named pins
were getting unwieldy and not very elegant…
-
Really scratching my head with this. Constantly displaying 24 hours even though mode is 12 hours.
- Arduino Uno with DS3231 module.
- Tried using `RTC.setHourMode(CLOCK_H12);` in setup - no luck.
…
-
```
I've just made a part for the IN-12 Russian nixie tube for a project(8 bit
relay + valve computer) I'm working on because using headers with named pins
were getting unwieldy and not very elegant…
-
I'm trying to drive 4 nixie tubes (with the goal of driving 6 for a clock)
I'm seeing inconsistent behavior. I see either 0, 1, 2 or 3 tubes changing digits. Even when 2 tubes are running, sometime…
-
Love the look of this project. Have you shared the PCB setup at PCBway? I'm great with a solder iron, but I have no experience getting boards manufactured. I believe PCBway has a way to publish the…