-
Som beacon fungerer disse out of the box slik som sticknfind taggene.
Fordel her er at man kan sette advertising interval ned til 100ms og på den måten få veldig nøyaktige målinger. Ulempen er at ba…
-
Hello. i have custom board with nrf51822, i can flash it by j-link. As i understood, after flash i should connect the board to pc, but i don't have usb. So can i generate firmare and burn it, without …
-
From reading #20 it seems I could use this on the Aliexpress nRF51822 beacon chips by simply taking the existing firmware.bin and replacing the string with the advertisement key.
Could this process…
-
I notice here a 'BBC Micro:bit' support.
The Micro:bit use `nrf51822`, So , it means i can use nrf51822?
-
Saw there might be work on either the NRF51822 platform or possibly mbed. Want to put my vote in for mbed especially because it now has support for the NRF51822 and a wide variety of STM and other ch…
-
Hello!
I'm using the RedBearLab nRF51822 (http://redbearlab.com/redbearlab-nrf51822/) board and want to use the DS1820 sensor.
It seems that this board is currently not supported. Is it possible to …
-
Hi virtualabs and everyone !
I saw you have worked on a version of btlejack-firmware for cheap RTL51822 but no news since (https://github.com/virtualabs/btlejack/issues/12#issuecomment-413928888)
…
-
Hi, great project! Any chance to get this running with a NRF51822 beacon? I tried to flash the prebuilt image. Flashing works, but unfortunately the beacon stays dead. Would be fantastic if you could …
-
I have one application where the data comes over UART and need to send that data over BLE. Data is coming over the UART port with a 230400 baud rate. But in the firmware code when I turn on the BLE an…
-
There is this [nice tutorial](https://github.com/seemoo-lab/openhaystack/issues/35) how to transfer the .bin to the nrf51 device, but I fail at step 7. I get the error:
```
openocd -f /usr/local/s…