-
I want to run nvdia Jetson TX2 board with tn40xx driver.
Kernal driver building is fine.
when connected network, Kernal driver was crashed.
Below is My system information.
**Hardware informati…
-
**Describe the issue**
We get the error output attached when running the `flash_jetson_external_storage.sh` script against an Nvidia Jetson TX2 NX with an NVMe SSD attached via a carrier board. Befor…
-
Hi! I have tried many times to install the Jetpack on a TX2 NX. I'm using Nvidia's sdkmanager.
I keep getting the error: board not in recovery mode.
I powered off the board, pressed the Recovery but…
-
Hi guys,
I have an hardware question this time. I want to deploy this project on a small embedded system from Nvidia. I don´t have the board yet but i am thinking on buy it. It is called the "NV…
-
Using an Nvidia Jetson TX2 board and Realsense SR300, with Realsense v2.13.0 and OpenCV 3.4.1.
Starting realsense_demo.out just outputs a black screen. The image received from the camera seems to …
-
yhalk updated
7 years ago
-
Hi again,
I'm still working with master and l4t-32.5.1. When I ran deploy.sh command to generate the tarball for Jetson Xavier NX as target, I got following error :
Generate Multi-Spec BUP Tool…
-
Hi @D3-growe , @D3-jwatts , @d3-sdunnington ,
I am trying to flash D3 Jetson SerDes Sensor Interface Card with D3 Jetson BSP v5.0 on a target device (Jetson Xavier AGX).
Configuration:
1> Targ…
-
```diff
[PATCH] [ARM64] Use x29 and x30 instead of fp and lr to make GCC
happy
GCC will abort the compilation with errors:
"operand 1 should be an integer register ..."
See also https://b…
-
Hi @hyye ,
Have you attempted to parallelise your mapping algorithm at all? I see you have linked to nvidia-docker so I imagine you have run this on the jetson TX2 or similar? Is there any reason w…
lsdta updated
4 years ago