-
even now before v1.12.0 in the doc
@openoms can you write here the info about the ssd board supporting 2TB ssd
-
Hi,
I'm not sure if it's the right place to ask for feature request, feel free to redirect me in the right direction if needed.
Using the Toradex i.MX 8M Plus and contributed support for PCIe/N…
-
### Describe the issue you are experiencing
I'm using a Raspberry Pi 4B with 8 GB of memory, and have been using a MicroSD-Card for around 5 years.
To get more performance, I switched now to an NV…
-
Hi
i modded my z620 with the nvme boot but I will revert to normal 3.96
The reason is when using pcie x16 adapter with nvme works boot not tested I boot from sata ssd.
I cannot access the bios g…
-
I cannot see temperature for my two NVMe disk.
Disk types:
SAMSUNG MZVKW512HMJP-000H1
WDC PC SN730 SDBPNTY-1T00-1101
Checking via CrystalDiskInfo show temperature fine.
![ssd](https://user-im…
-
hi 007revad. I'm not sure why I added the supplier ID in syno_hdd_vendor_ids as per the prompt. The "Unknown" now shows normal "HP", but the firmware version still indicates it cannot be recognized!
…
-
При конвертации файлов `jsonl.zst` в формат `parquet`, очень сильно вырастает потребление RAM и SWAP. Программа завершается c помощью OOMKiller. Нагрука на CPU - незначительная
Размер исходного ф…
-
### What happened?
Hello!
I have a Raspberry Pi OS Lite installed on an SD card and I am using it to install a Raspberry Pi OS Lite on an NVME disk. However when I run commands I get an error.
…
-
Hi,
Please don't take that as a complain, I only wish to help improve the software so I can use it.
I achieve very bad performance on Windows 10 LTSB 2016 with a Samsung EVO 960 250Gb and Veracr…
-
### Describe the bug
SSD is a category of storage technology, typically NAND flash-based. It does not define the interface with the rest of the system, whether that be USB, SATA, NVMe, or anything el…