-
I'm seeing this error when building greenlet using buildroot's ci [here](http://autobuild.buildroot.net/results/416/4161bfcd9577cdc6b9795fc3d6903f3bcc124f99/build-end.log).
```
greenlet needs to be …
-
Hello!
I used "OpenRISC SoC Practical Session Instructions" to get my very first OpenRISC experience.
All steps were OK, but this one fails:
`fusesoc sim mor1kx-generic --elf-load hello.elf`
I g…
-
https://gist.github.com/rofl0r/5d1a0dad03beb62027df326fb16e9a8d
for integration musl-generic parts need to be removed
volunteers ?
-
Build fails in fresh docker build on branch openocd-cubeide-r4 or tag openocd-cubeide-v1.8.0 or later.
Tag openocd-cubeide-v1.7.0 and branch openocd-cubeide-r3 build fine.
Docker commands:
```
A…
-
Extend the usecase of Yosys Synthesis() step :
Steps :
1 ) Add yosys synthesis to https://github.com/openrisc/or1k_marocchino
2) Example for reference : https://github.com/openrisc/mor1kx/blob/…
-
The OpenRISC specification requires that the EEAR register be accessible from the supervisor mode but the mor1kx implementation does not have the option to write to EEAR with the mtspr instruction ev…
-
is there a way to add GDB https://github.com/openrisc/binutils-gdb ?
thanks !
-
RISC-V toolchain can be currently installed with `./litex_setup.py gcc` and provides an easy way for users to install the RISC-V GCC toolchain while also being convenient for CI regression tests of th…
-
The librecores server fails to run jobs for mor1kx. It seems there is a filesystem error on the server.
See issue:
https://github.com/openrisc/mor1kx/issues/125
```
Cloning repository https:…
-
Dear olofk,
I have been trying to work with fusesoc for mor1kx openrisc cpu. While running the fusesoc run command I am getting this error message shown below.
ERROR: Setup failed : Unknown parame…