-
Hi,
Tested version: Pat v0.10.0 (601f6d3) linux/amd64 - go1.15.1
Remote client: RMS Express 1.5.12.0-B2FHM
Steps followed:
1. Create a P2P only email with a remote callsign
2. Establish a P2…
-
Compatible with many transceiver
-
Hi,
Tested version: Pat v0.10.0 (601f6d3) linux/amd64 - go1.15.1
Attempt to configure "pactor" in the listen block results in the following error:
```
2021/03/30 22:27:14 'pactor' is not a v…
-
PMON is a pretty interesting piece of decoder software made for Raspberry Pi 3B+ (minumum) or 4 by the creators of PACTOR. They plan to implement PACTOR IV decoding early this year.
I don't have a…
-
Need add support HF speed 300 bod. Or pactor connect.
-
I've gone on a bit of a mission to see if it is possible to use the QRP-Labs QDX with Winlink. As the QDX only supports single carrier modes, I'd like to be able to only enable FSK modes with ardopc.
…
-
Some notes from Jason:
> As far as I remember, it used PACTOR and some windows software that
> interfaced with the PACTOR modem. I think the windows software also
> created a basic email server t…
-
Hello all,
I have an issue with multithreading CPU collision detection and PhysX 5.1. I want to track contact points between complex geometries (modelled as kinematic bodies) in a simulation applicat…
-
Not sure if this is something that is really hard to do.
Predictions are currently what I wish most for in pat.
Something like with Airmail, where it tells you the probability for a gateway and …
DC7IA updated
3 years ago
-
Adding a search string also by word filtering in the Comments field (e.g. FT) should be flexible. Let's say we can add also a word MSK, PSK ... and other **DIGI** modes.
_Originally posted by @s50u…