-
Hi, thanks for the amazing work
I wanted to bring up a couple of things:
* I noticed the repository size is currently 300M with 140M in .git, so if you are not planning to squash all commits and lo…
-
## Specifications
> Note: Incomplete and likely to change
* Wavelengths: IR, Vis, UV -- depends what optics are in the dome
* Will need to know which wavelengths are blocked to assess if th…
-
Emanuele Galiffi, Romain Tirole, Shixiong Yin, Huanan Li, Stefano Vezzoli, Paloma A. Huidobro, Mário G. Silveirinha, Riccardo Sapienza, Andrea Alù, J. B. Pendry
> Time-varying media have recently e…
-
I have a few instruments in use, which I will publish, once we reduced the number of pull requests and urgent issues. However, in case someone needs these drivers, I'd be happy to open a PR and offer …
-
Placement:
* Can't place anemometer at top, because it would get in way of photonics.
* Can't really place it at bottom, because it would be affected by mounting rod
* Can't really place it in mi…
-
Hi All
I am having issues getting Anything to happen when selecting either the Jtech Photonics and/or the Endurance Lasers extensions to generate Gcode for Laser Etching or cutting. The extensions al…
-
I'm trying to change a CWS file to modify the delay of some specific layers, in gcode they normally follows with
```
; N
M106 S255
; X
```
where X is the exposure time of current layer, but loo…
-
```
The idea is to implement internal convergence checks (based on e.g.
extrapolation technique) to make the code fully adaptive. So it may
automatically converge to the desired accuracy using minimum…
-
```
The idea is to implement internal convergence checks (based on e.g.
extrapolation technique) to make the code fully adaptive. So it may
automatically converge to the desired accuracy using minimum…
-
```
The idea is to implement internal convergence checks (based on e.g.
extrapolation technique) to make the code fully adaptive. So it may
automatically converge to the desired accuracy using minimum…