-
Hi,
I'm using the Noetic ROS driver for an SBG Ellipse D.
I would like to stream the PPS signal on "SYNC OUT A" while the device receives RTCM corrections via "SYNC IN B – PORT B RX ODO A."
How…
-
In an application that sends packets over a DTLS channel we noticed a performance degradation when lifting OpenSSL version from `3.1.0` to `3.2.0`. After some measurements on the application we found …
-
(transfer https://gitlab.khronos.org/anari/anari/-/issues/82)
- on `Frame` or on `Renderer`?
- which ones do we specify: denoiser, tonemapping, ...
- when are PPs run? after `renderFrame`, or rat…
-
## Description
This is a follow up to the great improvement achieved with https://github.com/electricitymaps/electricitymaps-contrib/issues/6581
Thanks to @madsnedergaard , @VIKTORVAV99 and @w-flo …
-
Hi I've followed this guide twice and still get the same result no time in chronyc from the GPS hat. Just wondering if you'd have any ideas what could have been missed.
```
=======================…
-
How to use PPS?
Could I know some pps using example?
-
Hi,
I’m encountering an issue with DHCP leases in my test setup. While I’ve configured BNG Blaster to create 3000 sessions, I can only see 1023 DHCP leases being assigned, despite the fact that the…
-
I have fixed most of them, which were problems with the `sent` metadata line (missing gaps or gaps not notated as `--`).
2 [validation issues](https://github.com/nert-nlp/legal-cgel/actions/runs/11…
-
Buenas tardes
Después de cada batalla, se deberían resetear los PPs de los Pokémon? Cuando corro las simulaciones, a veces el programa no termina nunca porque se acaban los PPs. Es eso normal? O debe…
-
Hi, i encounter an error when run bayes model
idata_pps = model.predict(idata = idata, kind="response", inplace=False)
AttributeError: module 'xarray' has no attribute 'Coordinates'
Thanks
…