-
You have have a checksum bug that is corrupting the reading of data values that span more than one byte. See this line:
https://github.com/robotis-pandora/ROBOTIS-OpenCM/blob/master/OpenCM_ide/proces…
-
Hi,
It look like you've embedded your uploading code directly in your java mod of processing (cf https://github.com/robotis-pandora/ROBOTIS-OpenCM/blob/master/OpenCM_ide/processing-head/app/src/proce…
-
On the same bandwagon with the issue on OpenCM github, https://github.com/ROBOTIS-GIT/OpenCM9.04/issues/89
It will be so nice and helpful for us if the OpenCR Arduino IDE has the ARM64 support enable…
-
Dear Horchler,
I tried to import your library in Arduino IDE set with openCM board but unfortunately I'm getting compiler errors (same for USBprintf)
Would there be any easy way to make your li…
Rouno updated
6 years ago
-
Hello,
The ROM size of the STM32 in the OpenCM9.04 is supposed to be 118000, but if I write firmwares biggest than ~57k, the IDE fails (region `rom' overflowed by 8 bytes)
-
I don't know if this is the right place to post this but I have been stuck for over a week trying to upload code to my OpenCM9.04 board and I have been getting "board is not responding" as my reply ev…
-
### Describe the problem
Sorry again if there is open issue, did not notice one, but as always may not have searched enough.
I have been using RC9.2, but noticed yesterday some new stuff checked…
KurtE updated
3 months ago
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Sorry again not following the issue template.
I am running into a few issues/problems with updating the OpenCM 9.04 code base to current release code here. Also have questions about memory usage.…
KurtE updated
4 months ago
-
Not sure if this is the best place to ask? This is not totally specific to OpenCM, this equally will apply to OpenCR, XEL, Ros To Arduino... But the actual code may differ.
Again not sure if this…
KurtE updated
2 months ago