-
I came across this project while troubleshooting some issues with the "bwalink" docker container and figured this might be a more seamless integration.
I'm running into issues adding the spa connec…
-
I've got it working by changing GwChannelList.cpp to instantiate a different class (GwSerialModbusTask instead of GwSerial)- until pulling the upstream, where all of the serial handling is reworked.
…
-
Just wondering if you had any idea how the RS-485 protocol would work. I think the GROWATT inverters don't all have CAN but instead use RS-485. I've read that they communicate with the pylon-tech ba…
-
**Describe the bug**
The OSDP library code needs to have a way to pass in a GPIO that controls the DE pin (or NULL for no control).
**Background**
We are working on a project that will use OSDP t…
-
Hi, thanks very much for developing this, and for the very clear instructions.
Just one question; on an 8kW inverter, do you know whether it's possible to use the separate RS 485 port rather than t…
-
The VFD communicates over RS-485 / Modbus. At a bare minimum, we need to be able to read and set parameter values.
http://www.tecoproducts.com/PDF/L510_comm_addendum.pdf
-
We are using a few UART ports on the STM32F4 to communicate with feeders and other peripherals over RS-485 (thanks to the MAX3485 chip). Marlin does not currently have support for RS-485, or generally…
-
Can I get a little help troubleshooting my setup?
I have a Carrier Infinity furnace and AC unit that were installed in 2005. When I moved in about 3 years ago it was connected to a generic 2-stage…
-
When I check the Status of the twcmanager with "systemctl status twcmanager.service" looks the output like this:
● twcmanager.service - Tesla Wall Charger Manager
Loaded: loaded (/etc/systemd/syst…
-
скажите, а можно ли доработать ваш компонент, что бы можно было подключиться через TCP?
У меня несколько лет работало на такой связке Меркурий 230 ART-01 CN -> MOXA 485 to TCP -> iobroker . У последн…