-
Hello,
I got a "Waveshare RS232/RS485 to Ethernet Converter".
I still have to see how I get the Seriel Port via the network on my Linux server.
Has anyone already had experience with it?
I cou…
-
Hello,
Can u help me to gett it work?
i have installed youre addon
I have an elfin EE10A
There are 2 connections on the elfin
Ethernet and a green connector with txd rxd + -
I connected an 9 p…
-
Hi, i have issue again when read multipack battery.
Here this log
> 2024-08-11 17:15:34,343 - ha_mqtt - INFO - Connected to MQTT broker successfully
> 2024-08-11 17:15:34,346 - bms_comm - INFO - …
-
### Which node-red-contrib-modbus version are you using?
5.31.0
### What happened?
I am testing this library to read the Delta PLC DVP14SS2 controller, which operates in Modbus ASCII mode. I …
-
I would recommend for consideration that it would be worthwhile to add the possibility to transmit modbus RTU frames via TCP and UDP ethernet network.
I often come across that the device used is a …
-
A family member of mine put an SE7K-RW00ENNN2 on the wall, fully expecting to be able to just log-in on it like on a router and read the values. Of-course, SolarEdge only appears to offer cloud-based …
-
Hi!
Happy with the module. Have just encountered one problem I can't resolve.
I have set the full parameter value which controls gain in channel 3 of an Automixer in Audio Architect.
When I try…
-
**Device Description**
This device is a fuel cell cabinet controller. The cabinet includes four fuel cells and four batteries as well as the controller and a myriad of sensors.
**Device Access**
…
tjzay updated
2 weeks ago
-
The BB-RS232 module is getting hard to find and very expensive. I tried an experiment where I used a generic [Serial to Ethernet](https://www.amazon.com/dp/B087J9F6LF) server and was able to communica…
-
1x USB - supports composite profile (config serial/Mass Storage - SD)
1x Universal Serial (RS232/LIN) - Could be used to receive GPS data or drive LIN devices (Alternator/Wipers)?
2x CAN2.0A
1x CAN…