-
Do I need to change anything to run the adcTest.py script, it doesn't work, raw_value is always one, any suggestions?
rsyocto Vers. 1.042
-
Hello! I was working in the FPGA - SDRAM Communication project. All was going fine up to the part of the U-boot programming.
In instruction # 4:
"""
Now we load the rbf file into memory and then …
-
Hi Seb,
Thanks for all the great work you've done. I'm wondering about the device tree source file that you've written. The FPGA configuration that I'm using will not enable some of the peripheral…
-
First let me thank you for putting together this very nice solution for developing on DE10* platforms.
I have some issues that I'll split into separate github issues to keep track.
The first one…
-
How much work is needed to convert this to support the DE0-Nano-Soc?
Also, would it be possible to add a Discussion tab, to this repo? I have some questions, including this one, which are not rel…
-
Can i use rsYocto to create linux distro to De1-SoC? if can, could you tell me the way to do it?
thank you!
-
This probably ought to be a discussion, not an issue, but since there's no discussion tab, yet, I've put it here.
I mistakenly made a microSD card with rsyocto_SD_1042.zip in Rufus, and tried to bo…
-
Apologies for opening an issue, when this isn't really an issue, but I do have questions.
I'm glad to see this repo is still active. Would you consider adding a Discussion tab? They're good for p…
-
I've been able to restore the .qar archives for the DE0-Nano-SoC and the DE10-Standard, in Quartus 21.1, but not for the DE10-Nano.
For both DE10-Nano. .qar files, I get an error saying " Project a…
-
Hi Robin,
the **poweroff** command is not working. Instead of halting the system it reboots.
env ...
- Board: DE10-Nano
- SD Card Image: rsYocto Vers. 1.03 (build 10.01.2020)
for details …