-
### Discussed in https://github.com/ExpressLRS/ExpressLRS/discussions/2911
Originally posted by **Arielofek** September 3, 2024
Hello,
In my set up I have an ELRS receiver linked through SBU…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
When I analy…
-
I cannot seem to get any Rc signal on either DSM or SBUS.
Your configure instructions were very helpful btw. I've got the 4_19 rt kernel running, and the latest ArduCopter build running. I get the …
-
Hi Bertrand,
I have the following configuration in a scale heli:
Receiver 1: Archer R6 Plus
Receiver 2: Archer R9MX connection with S-Bus Out to Receiver 1
Receiver 3: Archer RS (separate supply…
-
We found that SBUS communication does not work with Futaba Receivers. We were able to track the issue down to the end byte. FrSky receivers use 0x00 as the end byte and this is how the code is setup c…
-
Hello, I see your project is quite successful but I am looking for something that apparently you have not yet achieved.
I explain to you:
- I have a rover or ardurover, my transmitters are a little …
-
Hello,
The idea here is to use the FrameLost status contained in the SBUS protocol to give an indication of the signal quality of the RC receiver, and use it instead of the analog based RSSI in all t…
-
When i set up a new craft and using the new Setup Wizard, I have no option to select MSP as the main RC source.
This would be needed for MSP-RC from mLRS (And maybe, just maybe in the future for ELR…
-
Documentation in [`read_sbus_from_GPIO_receiver.py`](https://github.com/QUB-ASL/bzzz/blob/dev/raspberry/bzzz/read_sbus/read_sbus_from_GPIO_receiver.py) is missing. Especially, we need to document [`pa…
-
Hey everybody, I'm pretty new to this stuff. I'm connecting a RadioMaster Pocket to a Pixhawk 2.4.8 clone through an RP3 RadioMaster receiver. The devices are all charged, and the radio is bound to th…