-
## Component list
- Motor.
- LM35 Temperature Sensor.
- HY-SRF05 Ultrasonic Sensor.
- 3 buttons.
- Red LED.
- USB to RS232 converter.
- Resistor 1K Ohm.
## Schematic
![PepsiCity_Scheme]…
-
## Milestone Description:
- **Objective**: Provide all relevant details about the hardware configuration and connections.
- **Deliverables**:
- A brief overview of the hardware used (microco…
-
I think the transistor is wired correctly in the Nano schematic and incorrectly on the other one.
I believe it should be an N-type transistor, wired to the middle pin with the 6.8K ohms resistor t…
-
### Describe the Bug
When using this mod in a build that you want to reproduce with a Create Schematic, the schematic cannot be used and causes a stack trace to be printed by Create with a warning.…
-
Where are the schematics for this particular card?
I am looking to figure out how to adapt this stuff to proprietary XT hardware such as the Toshiba series laptops, but I dont see any schematics a…
-
En este apartado buscamos exponer todo lo relacionado con el Hardware de nuestro proyecto, se incluira un diagrama esquematico que muestra como se conectan los componentes con la placa, como asi un li…
-
I have schematics for the robonii, and a bootloader.
Let me know if you want to chat
Tkunneke@gmail.com
-
Can you please publish PCB schematics in editable format to allow for PCB tunning?
Thanks.
-
-
Hello and thank you for this resource! I often use SKY130 for teaching examples in my classes.
Sometimes I want to show the transistor schematics of cells, but I don't see transistor schematics any…