-
Hi @markniu!
Because the thermal drift of the probe affects my nozzle to probe offset significantly and I have to adjust this offset nearly every print, the announced "bed collision sensing" would …
-
Consider evaluating `calc`/`try_calc` before `seek_before`, which would enable the following setup:
```rust
#[bw(stream = st)]
struct Main {
// need to write textures offset at 0xC...
// wr…
-
`cat /www/yourls/user/config.php` yields `define( 'YOURLS_HOURS_OFFSET', +0000 | sed "s|0||g") );` which make sense in terms of the error.
Looks like this is the source:
https://github.com/tired…
-
### Description
Support for WebXR Depth Sensing was added to three after it was implemented by the Quest browser.
However, the implementation (and spec) didn't account for offsets between the fov of…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Home position + Z Offset does not make sense.
When Z Offset is set to > or < 0.00, t…
-
When looking at this unit test:
https://github.com/blachlylab/dhtslib/blob/ca928a73796e50eb2758fca4c8d330cd28835020/source/dhtslib/gff/package.d#L21-L47
I was confused that an offset of 2 would tr…
-
**Description**
Having to manually adjust and set the offsets for each tool works but is very slow and prone to errors as you use the printer. There will always be small shifts and movements of every…
-
Hello @bigtreetech team,
I've been trying to get the microprobe v2 work with this board and I can't get it to sense when it is triggered. I'm running Klipper on Voron Trident with SB toolhead and t…
-
Even the 'classic'/'old' examples make use of the previous [output~] abstraction which did contain a [hip~ 3] object in the input. Hence, all the examples that had a [hip~ 5] for the output is redunda…
-