-
Hello,
Hi installed the evaluation board STEVAL-MKI217V1 in a custom android board. After all configurations, I can read some sensors data from Android SENSOR_SERVICE, but not all that I'm looking f…
-
- [x] Linear
- [x] Nonlinear
- [x] EOG
- [ ] Measures of Observability
- [ ] Sensor Placement
-
Hi,
first of all thank you for your work. Unfortunately I am not able to get this system to work properly on my Sensus 620 watermeter.
Is there a specific place on the rotary disc to place the se…
-
The ROS2 Camera Sensor component appears to be facing the +Z direction, while the standard O3DE Camera component placed on the same entity faces the +Y direction. This makes it impossible to use the V…
-
- Height, long-distance range finder, raspberry pi - give locations for pod placement
- check mobile screen for raspberry pi
- things to consider for sensor placement -
- Location orientation
…
-
Crowdstrike v1.3.0 from v1.2.0 this was successfull. After the upgrade we try to "apply changes" on all other tiles such as Prisma
```
===== 2024-09-24 22:35:43 UTC Finished "/usr/local/bin/bosh -…
-
### The problem
When I add my Somfy Protexial Alarm to my KLF200, it's discovered prefectly. But once I restart the integration to add the alarm entity, the integration fails
### What version of H…
-
> This is a further improvement upon the recent, largely sim-side additions inspired by the last ticket accompanying the satellites update. It would require both database and sim-side tweaks to best p…
-
Hi,
hope the project is maintained, as this is one and only realistic IMU simulator for mocap.
The sensor reading from a motion also depends on the initial starting sensor orientation.
Is there…
-
Hey all,
I'm looking to add a few sensors to ego vehicle pointing to different direction. Editing and verifying with simulator takes a while to go back-and-forth. Is there a tool that gives me the …