-
### The problem
When creating multiple HomeKit bridges in Homeassistant, it has been observed that the serial numbers assigned to these bridges are identical. This leads to various challenges, espe…
-
This project likely is exactly what I am looking for.
I will have to order the MAX3232 Breakout board, though, as I don't have one right now to test this.
EDIT:
I got the MAX3232 Board today to…
-
## Issue
The pentair binding, when using the Serial Bridge ignores the "id" thing configuration. The makes the binding when using the serial bridge configuration essentially read-only. It should be…
-
**Describe the bug**
My laptop does not power off when issuing "poweroff" or "shutdown -p now" when amdgpu.ko from drm-61-kmod-6.1.92 is loaded.
It worked before with drm-61-kmod-6.1.69_2
**FreeB…
-
Need ESP32, why?
-
Add a transparent serial bridge on port 2323 that would allow to interact with the printer as if it was connected to a serial port locally.
While a client is connected there, __all other activity n…
-
hi, i would like to buy this model of comelit serial bridge:
https://pro.comelitgroup.com/it-it/prodotto/20090334
is it compatible with your script?
is this script working with mqtt command?
i wou…
-
It would be very useful to have TauLink support a transparent
serial bridge (e.g. using VCP on the ground side) and a PIOS_COM
interface on the FC side that can be assigned like a normal
serial port.
…
-
hi, i would like to buy this model of comelit serial bridge:
https://pro.comelitgroup.com/it-it/prodotto/20090334
is it compatible with your script?
is this script working with mqtt command?
i wou…
-
Add support for the Acer Chromebook 515 Plus - CB515-2H, also known as the Google Omnigul / Brya.
lspci output:
```
00:00.0 Host bridge: Intel Corporation Device 4609 (rev 04)
00:02.0 VGA compat…