-
The [8_Compressor_RMS](https://github.com/MCUdude/SigmaDSP/blob/3d151affd84172732a1ff82ccf50f4be9280a834/examples/8_Compressor_RMS/SigmaStudio_project/8_Compressor_RMS.dspproj) project file has zero-b…
-
As the title says, the documentation on how to install custom DSP programs (that is _after programming them in SigmaStudio_) is currently not documented.
My current state is that I adapted `Beocrea…
archi updated
3 years ago
-
As far as I understand there is no feature to import parametric EQ settings in the current web-interface.
It would be great to provide this feature again (just like advertised in the youtube video).…
-
Would it be possible to program an ATmega32 (using MightyCore) as a bootloader for Adau1701?
I'm trying to bring to life a pair of Powersoft DigiMod 3004PFC4 amps with Powersoft DSP-D cards.
Powerso…
-
It seems like the mixer elements are not supported (yet)?
I wanted to try crossfading between 2 channels via I2C.
-
- Check for SC on power lines
- Solder Linear regulators and Power connector
- Check again for SC on power lines (result: 1K aprox. impedances)
- Connect power with ampmeter (result: power rails OK…
-
First power on of new board
On first boot OS is 20201213-pi4
no DSP program is loaded, warning message said program was corrupted on the board
Tried to reinstall it using reinstall button
did not…
-
Hi,
Small request: the naming of channels does not seem to be consistent.
On https://www.hifiberry.com/beocreate/beocreate-doc/beocreate-hardware-documentation/,
it's CH1,0,16,17 and on the sound…
-
when running sigmadsp-backend, i get the following error
```python
person1@raspberrypi:~/sigmadsp $ sigmadsp-backend
INFO:sigmadsp.backend:Starting the sigmadsp backend, version 3.0.12.
Traceba…
-
**Describe the bug**
Version 13 of the DSP swaps the left and right speakers over.
**HiFiBerryOS version**
20230223
**HiFiBerry sound card**
DAC+ DSP
**To Reproduce**
Steps to reproduce t…