-
Hi,
I want to use the ROS2 time in a system without PTP/SNTP support. Is there a configuration parameter to support this?
Thanks
-
Hello
I don't know if the last version of Esphome break all my conf of this Athom Relay 4CH but this relay seems boot and after each action on switch it reboot, disappear from Home Assistant, .....…
-
It looks like there's SNTP functionality in esp-idf. We probably ought use it to try and set the RTC to something real.
-
### Discussed in https://github.com/jomjol/AI-on-the-edge-device/discussions/3136
Originally posted by **requiemmg** July 1, 2024
### The Problem
Hallo, ich habe vor Kurzem einen turnusmäß…
caco3 updated
1 month ago
-
### The Problem
In 15.7.0 (and below) LED intensity had no effect.
In 16.0.0-RC4 it has the desired effect for taking the reference image. At 20% it looks perfect. At 100% you can hardly recogni…
-
JIRA Issue: [KIEKER-772] NTP time source
Original Reporter: Andre van Hoorn
***
Has been developed by Christian Zobel in a Master's thesis at Mannheim University of Applied Sciences.
The time sourc…
-
```
In case we're not the only ones who wish to keep UTC time on the TinyOS nodes,
here's our SNTP client module for SNTP version 4 (RFC 4330). It's a rather
simple implementation and there's probab…
-
```
In case we're not the only ones who wish to keep UTC time on the TinyOS nodes,
here's our SNTP client module for SNTP version 4 (RFC 4330). It's a rather
simple implementation and there's probab…
-
_Original author: jmatts...@dius.com.au (November 25, 2011 05:10:29)_
In case we're not the only ones who wish to keep UTC time on the TinyOS nodes, here's our SNTP client module for SNTP version 4 (…
-
```
In case we're not the only ones who wish to keep UTC time on the TinyOS nodes,
here's our SNTP client module for SNTP version 4 (RFC 4330). It's a rather
simple implementation and there's probab…