-
Ensure heating element is not able to touch any not solderable materials.
Electrical outlets and ventilation is secure
eye protection.
We have lead free solder now, so only with very extended solde…
-
Or solder female socket headers onto picowbell for removability.
Need to order some…
-
No matter how modern, steampunked or deviated from the recommended design :)
I'll kick things off...
Mine has a few substitutions based on what was to hand:
TL072 for the opamp
74HC4052 scavenge…
-
### Describe the bug
I can't reload alcohol-fueled soldering iron with methanol until denatured alcohol has been reloaded and removed.
I suspect that [character_functions.cpp](https://github.com/c…
-
Hello, good soldering station, excuse me, where the soldering station firmware? Thank you very much.
-
Design a tray to hold the components of a soldering station.
- [ ] [Soldering Iron Stand](https://a.co/d/dPOayz8) - Fixed to tray
- [ ] [Soldering Mat](https://a.co/d/bYyA7yC) - Removable
- [ ] …
-
The serial interface is working well, but shows a little bug: If I send a command to soldering station the answer of the station is shown but after that appears a line "Not supported" followed by a bl…
-
Maybe is possible to use the Dell module to get switches in addition to keycaps? Possible (or not) methods:
- Desolder the switch
- Use the soldering iron tip to heat the switch SMD pads from ab…
-
### Describe the bug
I had the book "theory of electronic circuits" that book has the recipe to create a welding equipment and the welding station for the vehicle, the problem is that when I meet the…
-
Dear @wagiminator ,
thanks for the great project.
I managed to build the PCB and solder all components. Flashing process via an Arduino UNO seems successful, but the (new) display stays dark.
…