-
Sovol defined the part cooling fans as two separate generic fans and sets them correctly using the gcode_macro. I don't think that is necessary, as both fans aren't individually controlled, hence a vi…
-
### Cura Version
5.7.2
### Operating System
Windows 11
### Printer
Sovol SV01 PRO
### Name abnormal settings
Changed the print speed to 60. added a raft and supports
### Describe model locatio…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
As I reported in issue #26961, My SV06's crash when trying to boot using Any stock branch of …
-
### Description of the bug
When using the Sovol SV04 Dual Extruder Profile by default in the print settings the wipe tower is activated.
Since this printer uses independent extruders a wipe tower …
-
### OrcaSlicer Version
1.9.0
### OS version
Windows 11 Pro 22H2
### Additional system information
_No response_
### Printer
Sovol SV06 Plus
### How to reproduce
1. I open a …
-
The sv06plus printer.cfg contains several duplicate sections with sometimes different settings, see e.g. "max_accel" in "[printer]".
Please clean up the settings, it is completely unclear, which sett…
-
Hey man, thank you very much for you configs! May I ask, do you have profiles for the slicers such as SuperSlicer or PrusaSlicer?
-
I try to fix in different way, but it doesn´t matter to give the configs this requested value - no change.
Any Ideas welcome.
I know this is deprecated since month.
in toolhead.py there are r…
-
### Cura Version
5.6
### Operating System
Window 10
### Printer
Sovol SV04
### Reproduction steps
Tried to slice and print only using right extruder (#2). The software does not seem to recogniz…
-
Hi,
I'm not sure if you are interesting in incorporating this or not but just an FYI, I have started making some basic changes to make your code work on the Sovol SV02 (https://sovol3d.com/products…