-
Hi – I'm using this crate to drive a ZED-F9P module over i2c. I'm in the process of adding the necessary code for supporting PPP-RTK (roughly following [this example](https://github.com/sparkfun/Spark…
simgt updated
3 weeks ago
-
Ardupilot already supports RTCM messages which is a standard message format for providing GNSS corrections. SPARTN is a new standard message format for providing similar corrections. There are a coupl…
-
Hello,
I open the discussion regarding SPARTN integration in PX4. In my case, I use SPARTN with PointPerfect (from ublox). I succeed to forward the SPARTN data through UART to ublox device by doing…
-
### Subject of the issue
PointPerfect for RTK Express Plus Support
https://docs.sparkfun.com/SparkFun_RTK_Firmware/configure_pointperfect/
### Your workbench
Dev 3.5 with express working as…
-
-
When I set the correction source to "L-band only," the SPARTN keys never update. I have the wifi set up and assumed it would grab fresh keys when on the local network, but it does not. It only works i…
-
This is a note-to-self, so this doesn't get forgotten...
We still need to include the radios (CORR_RADIO_EXT and CORR_RADIO_LORA) in the corrections priority handling.
We discussed that the best…
-
Hi, should this example work with MAX-M10S? I never get any auto callbacks, I do get PPS etc.
https://github.com/sparkfun/SparkFun_u-blox_GNSS_v3/blob/main/examples/Example8_PositionVelocityTime_Ca…
-
Hi, I have been playing with pyspartn a bit more and am now close to result I hope, thus my ability to now find errors deep in the parsing.
When using version 1.0.2 (latest at the time of writing…
-
I am having trouble with version (0.5.2-1jammy.20240731.053557) of ros-humble-ublox-dgnss installed from apt on Ubuntu 22.04 on Raspberry Pi and operating in RTK-GPS mode with an rtk2go.com correction…