-
Hello.
I want main.hex and eeprom.hex file that I can upload to MCU.
I have STC15W404AS Chip in the pcb. I do not have knowledge to use compilers.
I use the STC-ISP program v6.86U
Thanks.
-
```
stcgal -p COM3 -P stc8 .pio\build\STC8H1K16-rev52\firmware.hex
Waiting for MCU, please cycle power: done
Target model:
Name: STC8H1K16
Magic: F721
Code flash: 16.0 KB
EEPR…
-
Hello,
I am using a PCB that contains the STC8A64D4-LQFP44 device. The board contains a FTDI device (FT234XD-R). When plugged in the FTDI chip is powered from the USB but this rail is not shared …
-
Hi, FOA thanks for this amazing project and all that trigger to enhance the usefulness of this thermostat.
I got one spare thermostat from a project, that seems to be based on Renesas 78F9224 / 78K…
-
hello
i beginners for stc and i see document but, i have questions
how to use auto-download-schematics?
have device connect to usb port and connect mcu pin ?
thankyou
-
Hello,
I'm trying to install your firmware onto the bbs02 controller (new controller from this year). however Following the instructions, I'm unable to even find the mcu. after unpotting I can confir…
-
I want to burn a 8051chip use a raspberry without usb adapter
It is possible?
thanks!
-
Thank you so much for developing this tool!
I am having a little trouble getting it to work with a STC15L2K32S2 with a PL2303 on OSX. It appears to detect the chip correctly:
```
python3.5 stcgal.py…
-
It'll be nice to have STC's official fancy U8W programmer support. It's an inexpensive(15 USD or 12.7 Euro) dedicated programmer for all STC micros with a few additional features such as offline progr…
-
```
hackpro:uHID-bootloader-nrf24lu1p jens$ make
-e \e[1;36m[GEN]-e \e[0m /Users/jens/build/nrf/uHID-bootloader-nrf24lu1p/tmp/edeploy.mk
-e \e[1;36m[GEN]-e \e[0m /Users/jens/build/n…