-
Dear fellows,
I have the T-SIMCAM OV2640 and the SIM7600G-H, which has the TP4056 battery charger, this charger only has a blue LED, I've seen other TP4056 that has a green and red a LED to know if…
-
Why using a TP4056 when using a solar panel?
Wemos D1 mini pro v 2 includes a battery charger. Won't it be possible to connect the solar panel directly to the D1 mini pro?
-
Pin 9(exposed pad) its GND pad. This can be found in the [datasheet](https://static.chipdip.ru/lib/848/DOC018848830.pdf)
-
Hey.
In the assembly guide page 7 is shown a tp4056 module similar to the one I have here.
It only has 4 solder holes (in+/- and bat+/-).
However, the pcb also has out+/-.
I can't see clearly in t…
-
_From [bluearc....@gmail.com](https://code.google.com/u/112158384960039030429/) on January 27, 2014 21:25:24_
the footprint seems to be to small
TP4056
_Original issue: http://code.google.com/p/frit…
-
Built a window sensor, everything worked well, started thinking about a v2. Here is what I came up with, take it or leave it.
## Changes
1. Adds a `TP4056` (USB-C here, could also be Micro USB) f…
-
As I'm going to throw in quite some photos, I'm adding a new issue for the TP4056 board so that everybody who opens #12 doesn't have to load all the photos.
![Board width](https://cdn.hackaday.io/i…
-
It would be great to create a method or documentation around battery powering the CYD.
I'm sure it's very achievable using a cheap lipo IC like the [TP4056*](https://s.click.aliexpress.com/e/_DEaup…
-
I build something familiar with the same battery charger. But the TP4056 only provides the battery voltage. E. g. with 4.2V (fully loaded battery) and VCC connected to 5V Vin I can't read out the DHT2…
-
Hi. I'm not an electronic expert, and currently power an ESP32-CAM with a solar charged battery. I use a TP4056 for the charging I use a TP4056. My solar panel has peaks of 8V.
I wanted to use a supe…