-
### The problem you're addressing (if any)
TPD tests use tpm2-tools which obviously only work with TPM 2.0. Performing the tests on Optiplex 7010 fails because it has TPM 1.2.
### Describe the solut…
-
Catlets can contain a capability tpm (all base catlets for windows already have this).
TPM should be enabled if this capability is present or disabled if configured to disabled (same as for other …
-
Hi PacBio,
I just checked a filtered isoform list in "XXX.filtered_lite_classification.txt" file from my isoseq3/pigeon pipeline. There are many, so I want to prioritize the predicted isoform tran…
-
Hi Thank you for developing this useful tool!
I would like to inquire about the differences between transcript_tpm.tsv and transcript_model_tpm.tsv.
The file transcript_model_tpm.tsv contains the …
-
Following recent release, we need to port the existing example from `tis-analyzer` to TPM commands `tis `
-
I've been testing TPMS RX via rtl_433 and an RTL SDR and have been able to detect most tested sensors except for one belonging to a 2023 KIA EV6. I was able to capture information with -A, and I did t…
-
Hello,
I geatly appreciate the creation of a TPM calculation tool specifically for prokaryotes.
I'm writing to raise a concern regarding the TPM values calculated by FADU.
I tesed FADU with bo…
-
Similar to https://github.com/OBDb/Hyundai-Kona-Electric/issues/12 we might want to try:
```
ATSH7A0
ATFCSH7A0
ATFCSD300000
ATFCSM1
22C00B
```
-
The paper's Figure 4 shows the HyperEnclave quote structure as follows
It seems that the HyperEnclave quot…
-
## Describe the issue
The other day I tried to create a Windows VM and failed since trying to run it resulted in an error, "Cannot access TPM data." The next day I tried again to make a new VM and …