-
Hi,
When I run the bringup code, I cannot see the nodes on the network. If I SSH into the robot and run it I can control the robot, view it in Rviz2, etc. However, I cannot access the nodes elsewhe…
-
Hello I have a RM520N-GL and I have installed the main branch with the simple admin and the Entware/OPKG packages. yet when I go over to my browser and navigate to the http://192.168.225.1:8080/ ip ad…
-
### Describe the bug
Today at about 9 UTC, my Cudy WR2100 stopped transmitting traffic on the wan port after about 2 days uptime (without any outside interference). Other ethernet ports also don't wo…
-
I'm not able to get the LibreSDR to grab a DHCP IP when I plugin a ethernet cable into my network, is there a setting I need to change to enable the ethernet jack?
BTW, I can access the LibreSDR o…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hi
I unable to get the usb 3.0 gigabyte ethernet dongle to work or being detected with opnsense over my raspberry pi 4b.
May i know what usb 3.0 gigabyte ethernet chipset or any brand that can…
-
Hi,
First I need to apologize if my question may be unrelated to the repo but I thought that you may already face the same issue.
I'm trying to make ethernet over USB working on my Lichee Nano board…
-
It would be useful to enable ethernet over USB support on the yocto/poky build, in a similar way as it is done in the official image you find in the on-board eMMC.
-
It would be useful to enable ethernet over USB support on the yocto/poky build, in a similar way as it is done in the official image you find in the on-board eMMC.
-
Hi, I would like to use this to read serial data from my Firewall in the event that the boot fails.
The firewall currently has a USB serial interface built in, and a serial RJ45 interface.
Will …