-
Main body in
https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/STL/Main_Body_EBB.stl
Can't fit with
https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2…
-
Please upload the Switch Wire Voron Afterburner X carriage.
I have searched every repository I can find and all have had the x carriage replaced and are not compatible with the Afterburner.
Ev…
-
These two links at the bottom of the page give 404 errors.
slicer config: https://github.com/EricZimmerman/VoronConfigs/blob/master/Slicer.md
PRINT_START macro: https://github.com/EricZimm…
-
Would it be possible for an alternate "Main Body" file to be published for the Rapido UHF? The official Stealthburner mod is located here: [https://mods.vorondesign.com/detail/XN1NolgVYYBu1HNnxqC7Fg]…
-
Hi.is it possible expand the arms for this mod https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf ?
-
The left and right XY-Joints mirror each other in terms of the bearing stack and the GT20 idler.
The bolts which holds the GT20 idler screws directly into the plastic, whereas the bolt holding the be…
-
**Is your printer similar to any that currently already have support?**
Core xy
**What mounting scheme do you plan to use?**
On-Printhead, Under-Bed, Gantry-Mount, All can
**Any existing mount…
-
I can't seem to find the STLs for Skirt>Middle_Fan_Support, both here and in the VT.zip file. I will save a mesh from the CAD file, but it seems odd it is missing.
-
### Which mod does this issue apply to?
xbst_/V2.4_Skirt_Buttons
### Relevant VoronDesign printer
Sur ma V2.4
### Describe the bug
Les boutons mis en lien ne correspondent pas aux extrusions fait…
-
At random moments in the middle of printing, the connection with EBB is lost. On forms there is an idea that the matter is in 64-bit OS which is not very compatible with 32-bit mainsail. I don't under…