-
## Steps to reproduce
As I understand, it can happen when computesk connection breaks without a compute restart.
If networks lags for a bit, a scenario like this can happen:
- connection breaks…
-
WALLY has the footprint for a high range (up to 400g) accelerometer on it, the H3LIS331. Is this going to be useful? Will need to talk to flight sims
…
-
We're using a BMI323 IMU, connected over the I2C0 bus. This module needs to be able to communicate with it and return relevant data.
Also consider any calibration that is required for the module to w…
-
We have a MCP96L00T thermocouple amplifier connected over the I2C0 bus. This module should report temperatures coming from the amp, and also be able to set the thermocouple type. The amp will require …
-
@Sohammore03 has made an extended range barometer board that works over I2C. We can connect this to WALLY using the Qwiic connectors to either I2C0 or I2C1.
-
We have a MLX90395KLW magnetometer connected over the I2C0 bus. This module needs to be able to report incoming data from it.
-
We'll need an efficient way of storing/transmitting the data generated by the sensors on WALLY. While we have an SD card with more than enough storage, transmission speeds are very low and efficiently…
-
### What type of bug is this?
Unexpected error
### What subsystems are affected?
Distributed Cluster
### Minimal reproduce step
https://github.com/GreptimeTeam/greptimedb/actions/runs/9814869931/…
-
Hello,
While restarting YAMCS, I found the following issue:
```
11:09:00.049 _global [1] RdbStorageEngine Cannot load tablespace fsw: java.io.IOException: org.rocksdb.RocksDBException: SST file…
-
After rerunning make with the latest GCC (newer than 2023-12-20), WALLY-cbom fails:
```
Error on test rv64i_m/privilege/src/WALLY-cbom-01.S result 214: adr = 00000000800037c0 sim (D$) 0000…